Show simple item record

dc.contributor.authorD. A. Boismier
dc.contributor.authorHuseyin Sehitoglu
dc.date.accessioned2017-05-08T23:32:51Z
dc.date.available2017-05-08T23:32:51Z
dc.date.copyrightJanuary, 1990
dc.date.issued1990
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26932#68_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/107038
dc.description.abstractIsothermal fatigue tests, out-of-phase and in-phase thermo-mechanical fatigue tests were performed on Mar-M247 nickel-based superalloy. The experiments were conducted in the temperature range 500°C to 871°C. Results indicate that the lives differ with strain-temperature phasing and with strain rate. The results of out-of-phase thermo-mechanical tests correspond well with strain-life data of isothermal tests conducted at the peak temperature (871°C). However, the in-phase thermo-mechanical results differed depending on the strain amplitude. Significant surface and crack tip oxidation and gamma prime depletion has been observed based on metallographic and Auger Spectroscopic analyses. These changes were measured as a function of time. The environment induced changes significantly influenced the fatigue lives in isothermal and out-of-phase thermo-mechanical fatigue cases. In these cases transgranular cracking was observed. Grain boundary crack nucleation and grain boundary crack growth dominated the in-phase thermo-mechanical fatigue cases. Based on these observations the requirements for a life prediction model are outlined. The life prediction model and the predictions are given in Part 2 of this paper.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThermo-Mechanical Fatigue of Mar-M247: Part 1—Experiments
dc.typeJournal Paper
dc.journal.volume112
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2903189
dc.journal.fristpage68
dc.journal.lastpage79
dc.identifier.eissn1528-8889
dc.keywordsFatigue
dc.keywordsTemperature
dc.keywordsFracture (Materials)
dc.keywordsGrain boundaries
dc.keywordsFatigue testing
dc.keywordsoxidation
dc.keywordsAugers
dc.keywordsNucleation (Physics)
dc.keywordsFracture (Process)
dc.keywordsNickel
dc.keywordsSpectroscopy AND Superalloys
dc.treeJournal of Engineering Materials and Technology:;1990:;volume( 112 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record