Show simple item record

dc.contributor.authorR. R. Reynolds
dc.contributor.authorG. Chen
dc.contributor.authorK. Kokini
dc.date.accessioned2017-05-08T23:32:50Z
dc.date.available2017-05-08T23:32:50Z
dc.date.copyrightJanuary, 1990
dc.date.issued1990
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26932#38_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/107032
dc.description.abstractThe interface crack between two dissimilar materials subjected to a tension load was analyzed using the finite element method in order to study the “open” and “closed” crack tip formulations of this problem. It was shown that these two formulations can be modelled by the absence or presence of interface elements along the crack faces with a very fine mesh. The fracture parameters (k and G ) were calculated using crack flank displacements and extrapolation of the interfacial stresses to the crack tip. It was shown that even if the mesh is not fine enough to detect crack closing, the fracture parameters can be determined with a reasonable accuracy.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Mechanics of the Interface Crack Using the Finite Element Method
dc.typeJournal Paper
dc.journal.volume112
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2903184
dc.journal.fristpage38
dc.journal.lastpage43
dc.identifier.eissn1528-8889
dc.keywordsFinite element methods
dc.keywordsFracture (Materials)
dc.keywordsFracture (Process)
dc.keywordsStress AND Tension
dc.treeJournal of Engineering Materials and Technology:;1990:;volume( 112 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record