Show simple item record

dc.contributor.authorK. S. Chan
dc.contributor.authorS. R. Bodner
dc.contributor.authorA. Nagy
dc.contributor.authorU. S. Lindholm
dc.date.accessioned2017-05-08T23:32:50Z
dc.date.available2017-05-08T23:32:50Z
dc.date.copyrightJanuary, 1990
dc.date.issued1990
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26932#7_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/107028
dc.description.abstractThe multiaxial deformation behavior of the Ni-based alloy B1900 + Hf has been studied at elevated temperatures in the range of 649–982°C. Combined tension/ torsion cyclic tests were performed on thin-wall tubular specimens under both in-phase and out-of-phase strain-controlled loading cycles. Both straining conditions resulted in stress loci of comparable magnitude, exhibiting no difference in cyclic hardening response. A phase angle was observed between the deviatoric stress and the incremental plastic strain vectors during 90° out-of-phase strain cycling, and nonproportional stress relaxation occurred under biaxial strain hold. The overall results have been used to assess the flow law, the hardening equations, and the applicability of the J2 -based, elastic-viscoplastic model of Bodner-Partom for multiaxial loading conditions. The overall agreement between theory and experiment is good and discrepancies are discussed in relation to micromechanical considerations.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHigh Temperature Inelastic Deformation of the B1900 + Hf Alloy Under Multiaxial Loading: Theory and Experiment
dc.typeJournal Paper
dc.journal.volume112
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2903190
dc.journal.fristpage7
dc.journal.lastpage14
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsAlloys
dc.keywordsHigh temperature
dc.keywordsStress
dc.keywordsHardening
dc.keywordsTorsion
dc.keywordsCycles
dc.keywordsEquations
dc.keywordsTension
dc.keywordsThin wall structures
dc.keywordsRelaxation (Physics)
dc.keywordsTemperature AND Flow (Dynamics)
dc.treeJournal of Engineering Materials and Technology:;1990:;volume( 112 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record