Show simple item record

dc.contributor.authorW. N. Findley
dc.contributor.authorR. L. Sutherland
dc.date.accessioned2017-05-08T23:32:49Z
dc.date.available2017-05-08T23:32:49Z
dc.date.copyrightJanuary, 1990
dc.date.issued1990
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26932#1_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/107027
dc.description.abstractThe results of fatigue tests of two thermoplastics (cellulose acetate and polystyrene), three composites (laminated plastics of paper, canvas, and fiberglass) and one aluminum alloy (25-ST) are reported. Four different types of fatigue machines were used to test most of the above materials. The fatigue machines were: rotating-cantilever-beam, constant-amplitude-of-deflection, and constant-amplitude-of-force, types, all of which tested specimens in bending, and a constant-amplitude-of-deflection machine which tested specimens in direct tension and compression. Results from the four machines are compared and the cause of differences is explored.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleComparison of Fatigue Tests of Two Plastics, Three Composites and an Aluminum Alloy Obtained on Four Different Types of Fatigue Machines
dc.typeJournal Paper
dc.journal.volume112
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2903181
dc.journal.fristpage1
dc.journal.lastpage6
dc.identifier.eissn1528-8889
dc.keywordsFatigue
dc.keywordsMachinery
dc.keywordsComposite materials
dc.keywordsAluminum alloys
dc.keywordsFatigue testing
dc.keywordsPlastics
dc.keywordsDeflection
dc.keywordsForce
dc.keywordsTension
dc.keywordsCanvas
dc.keywordsGlass reinforced plastics
dc.keywordsPlastic laminates
dc.keywordsCantilevers AND Compression
dc.treeJournal of Engineering Materials and Technology:;1990:;volume( 112 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record