Show simple item record

dc.contributor.authorD. S. Kupperman
dc.contributor.authorS. Majumdar
dc.contributor.authorJ. P. Singh
dc.date.accessioned2017-05-08T23:32:48Z
dc.date.available2017-05-08T23:32:48Z
dc.date.copyrightApril, 1990
dc.date.issued1990
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26934#198_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/107015
dc.description.abstractThe strength and toughness of whisker- and fiber-reinforced composites are controlled to a large extent by the nature of the bonding between the fibers/whiskers and the matrix. An important problem in the development of metal matrix and ceramic-ceramic matrix composites is the simultaneous measurement of whisker and matrix residual stress. In certain systems, chemical bonding should be nonexistent and frictional forces at the interfaces provide the necessary link between the fiber and the matrix. In metal matrix composites, stresses in the fibers can lead to thermal-cyclic fatigue damage. Strain measurements have been acquired nondestructively for alumina/silicon carbide and titanium/silicon carbide composites by means of neutron diffraction techniques at the Argonne National Laboratory Intense Pulsed Neutron Source. Analysis of the experimental results shows that the in situ measurement of stress in the laboratory by neutron diffraction techniques is practical. The accumulated strain data could be used to calculate residual stresses in the fibers and the matrix (including stresses at the interface) simultaneously, or to determine stresses resulting from external loading.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNeutron Diffraction NDE for Advanced Composites
dc.typeJournal Paper
dc.journal.volume112
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2903307
dc.journal.fristpage198
dc.journal.lastpage201
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsNondestructive evaluation
dc.keywordsNeutron diffraction
dc.keywordsStress
dc.keywordsFibers
dc.keywordsBonding
dc.keywordsCeramics
dc.keywordsSilicon
dc.keywordsStrain measurement
dc.keywordsTitanium
dc.keywordsToughness
dc.keywordsFatigue damage
dc.keywordsNeutron sources
dc.keywordsForce
dc.keywordsMetals
dc.keywordsMetal matrix composites
dc.keywordsFiber reinforced composites AND Residual stresses
dc.treeJournal of Engineering Materials and Technology:;1990:;volume( 112 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record