Show simple item record

dc.contributor.authorT. D. Gerhardt
dc.date.accessioned2017-05-08T23:32:47Z
dc.date.available2017-05-08T23:32:47Z
dc.date.copyrightApril, 1990
dc.date.issued1990
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26934#144_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/107007
dc.description.abstractA closed-form elasticity solution is developed to predict stresses and strains in spiral paper tubes loaded axisymmetrically. No assumptions are made on stress distributions through the tube wall. Thus, the solution is valid for thick-walled tubes. The validity of this solution is established by comparison with experimental results. Measured strains in tubes subjected to external pressure showed remarkable agreement with the elasticity solution. After experimental verification, the elasticity solution is used to examine stress distributions in paper tubes loaded in external pressure. In both paper and isotropic tubes, the hoop stress dominates the other three stresses. However, the hoop stress distribution in paper tubes was radically different from the isotropic case. In paper tubes: (1) hoop stress was concentrated at the outer wall, especially for thicker tubes and (2) maximum hoop stress remained constant as tube thickness was increased. These differences can be attributed to the extremely small modulus in the radial direction of a paper tube. The hoop stress distributions indicate that isotropic, thick-walled cylinder theory is inapplicable for modeling paper tubes.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExternal Pressure Loading of Spiral Paper Tubes: Theory and Experiment
dc.typeJournal Paper
dc.journal.volume112
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2903300
dc.journal.fristpage144
dc.journal.lastpage150
dc.identifier.eissn1528-8889
dc.keywordsExternal pressure
dc.keywordsStress
dc.keywordsElasticity
dc.keywordsThickness
dc.keywordsExterior walls
dc.keywordsStress concentration
dc.keywordsModeling AND Cylinders
dc.treeJournal of Engineering Materials and Technology:;1990:;volume( 112 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record