Show simple item record

dc.contributor.authorK. K. Mathur
dc.contributor.authorP. R. Dawson
dc.date.accessioned2017-05-08T23:32:43Z
dc.date.available2017-05-08T23:32:43Z
dc.date.copyrightJuly, 1990
dc.date.issued1990
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26937#292_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/106986
dc.description.abstractThe development of deformation induced anisotropy in wire drawing operations is modeled with a finite element formulation that incorporates a polycrystalline plasticity model to describe the metal anisotropy. An aggregrate of grains is assumed to underly every material point on the continuum scale. The averaged response of an aggregate defines the macroscopic behavior of the corresponding material point, which is used in the finite element formulation to solve the boundary value problem corresponding to wire drawing. Macroscopic deformations imposed on the aggregate cause changes in the relative orientation of grains, thereby producing texture and associated anisotropy. Textures predicted from the drawing of aluminum wire are presented with special attention to the variations in texture from redundant deformations.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTexture Development During Wire Drawing
dc.typeJournal Paper
dc.journal.volume112
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2903326
dc.journal.fristpage292
dc.journal.lastpage297
dc.identifier.eissn1528-8889
dc.keywordsWire drawing
dc.keywordsTexture (Materials)
dc.keywordsAnisotropy
dc.keywordsDeformation
dc.keywordsFinite element analysis
dc.keywordsBoundary-value problems
dc.keywordsMetals
dc.keywordsAluminum
dc.keywordsWire AND Plasticity
dc.treeJournal of Engineering Materials and Technology:;1990:;volume( 112 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record