| dc.contributor.author | G. T. Spirnak | |
| dc.contributor.author | J. R. Vinson | |
| dc.date.accessioned | 2017-05-08T23:32:43Z | |
| dc.date.available | 2017-05-08T23:32:43Z | |
| dc.date.copyright | July, 1990 | |
| dc.date.issued | 1990 | |
| dc.identifier.issn | 0094-4289 | |
| dc.identifier.other | JEMTA8-26937#277_1.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/106983 | |
| dc.description.abstract | An experimental method for measuring material damping is described, which employs a free-free beam lightly supported at the nodes. A thermal space environment is simulated by measuring the material damping in air at temperatures ranging from −65°F to 225°F, and then subtracting out the effects of atmospheric damping. This method saves considerable time, cost and experimental difficulties associated with performing the experiments in a vacuum. Graphite/epoxy AS4/3501-6 composite beam specimens were tested. At room temperature, the [0°]12 composites were found to have an average damping ratio of 0.0556 percent. The [90°]12 composites were found to have an average material damping ratio of 0.55 percent. These data agree well with the theoretical models and experimental measurements performed in a vacuum. The material damping ratio is temperature dependent over the range −65°F to 225°F, increasing with increasing temperature. For the [0°]12 composite, the material damping ratio varies from 0.0397 percent at −65°F to 0.083 percent at 225°F. For the [90°]12 composite, the material damping ratio varies from 0.408 percent at −65°F to 0.860 percent at 225°F. | |
| dc.publisher | The American Society of Mechanical Engineers (ASME) | |
| dc.title | The Effect of Temperature on the Material Damping of Graphite/Epoxy Composites in a Simulated Space Environment | |
| dc.type | Journal Paper | |
| dc.journal.volume | 112 | |
| dc.journal.issue | 3 | |
| dc.journal.title | Journal of Engineering Materials and Technology | |
| dc.identifier.doi | 10.1115/1.2903323 | |
| dc.journal.fristpage | 277 | |
| dc.journal.lastpage | 279 | |
| dc.identifier.eissn | 1528-8889 | |
| dc.keywords | Temperature | |
| dc.keywords | Composite materials | |
| dc.keywords | Epoxy adhesives | |
| dc.keywords | Damping | |
| dc.keywords | Graphite | |
| dc.keywords | Vacuum | |
| dc.keywords | Composite building materials AND Measurement | |
| dc.tree | Journal of Engineering Materials and Technology:;1990:;volume( 112 ):;issue: 003 | |
| dc.contenttype | Fulltext | |