Show simple item record

dc.contributor.authorF. Trivaudey
dc.contributor.authorP. Delobelle
dc.date.accessioned2017-05-08T23:32:41Z
dc.date.available2017-05-08T23:32:41Z
dc.date.copyrightOctober, 1990
dc.date.issued1990
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26938#442_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/106972
dc.description.abstractThe respective influences of the Von-Mises equivalent stress and of the maximum principal stress on the high temperature creep damage of two industrial alloys (INCO 718 and 17–21 SPH stainless steel) are pointed out in a quantitative way through tensile-torsion biaxial tests. Through inversions of the shear component, the important part taken by the principal direction corresponding to the maximum principal stress is also shown. Opposite results are observed according to whether the alloy suffers cyclic hardening as 17-12 SPH does or cyclic softening which is the case of INCO 718. These results are supported by metallographic observations. They demand an anisotropic form for the damage variable D, while besides a time dependence kinetics equation must include the part taken by the strain. The bases of the formulation are described in Part II.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHigh Temperature Creep Damage Under Biaxial Loading—Part I: Experiments
dc.typeJournal Paper
dc.journal.volume112
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2903355
dc.journal.fristpage442
dc.journal.lastpage449
dc.identifier.eissn1528-8889
dc.keywordsHigh temperature creep
dc.keywordsStress
dc.keywordsAlloys
dc.keywordsEquations
dc.keywordsStainless steel
dc.keywordsHardening
dc.keywordsShear (Mechanics) AND Torsion
dc.treeJournal of Engineering Materials and Technology:;1990:;volume( 112 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record