Show simple item record

dc.contributor.authorC. L. Chow
dc.contributor.authorK. Y. Sze
dc.date.accessioned2017-05-08T23:32:41Z
dc.date.available2017-05-08T23:32:41Z
dc.date.copyrightOctober, 1990
dc.date.issued1990
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26938#412_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/106967
dc.description.abstractA recently developed anisotropic model of continuum damage mechanics has been applied successfully to characterize ductile fracture of cracked plates under mode I and mixed mode failures. The damage model is further extended in this investigation to examine its applicability to include notch ductile fracture of thin plates containing a circular hole. Two hole sizes of 16 mm and 24 mm diameters are chosen and the specimen material is aluminum alloy 2024-T3. Fracture loads of the plates are predicted by the damage model and compared satisfactorily with those determined experimentally. This investigation provides an important confirmation that not only the anisotropic model of continuum damage mechanics but also the same failure criterion developed can be effectively employed to characterize both ductile fracture for plates containing an isolated macro-crack or circular hole which would otherwise not be possible using the conventional theory of fracture mechanics. The successful development of the unified approach to characterize ductile failure provides a vital impetus for design engineers in the general application of the theory of continuum damage mechanics to solve practical engineering problems.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCharacterization of Notched Ductile Failure With Continuum Damage Mechanics
dc.typeJournal Paper
dc.journal.volume112
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2903351
dc.journal.fristpage412
dc.journal.lastpage421
dc.identifier.eissn1528-8889
dc.keywordsFailure
dc.keywordsPlates (structures)
dc.keywordsDuctile fracture
dc.keywordsFracture mechanics
dc.keywordsEngineers
dc.keywordsAluminum alloys
dc.keywordsStress
dc.keywordsDesign AND Fracture (Process)
dc.treeJournal of Engineering Materials and Technology:;1990:;volume( 112 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record