Show simple item record

dc.contributor.authorG. Chryssolouris
dc.contributor.authorP. Sheng
dc.contributor.authorW. C. Choi
dc.date.accessioned2017-05-08T23:32:40Z
dc.date.available2017-05-08T23:32:40Z
dc.date.copyrightOctober, 1990
dc.date.issued1990
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26938#387_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/106963
dc.description.abstractThis paper presents a concept for performing three-dimensional laser machining on composite materials, using two intersecting laser beams to create grooves on a workpiece. A volume of material is removed when the two grooves converge. An analysis of the grooving process was conducted for carbon/teflon and glass/polyester materials. A model was developed to determine groove depth from process parameters and material properties. Close agreement was found between model predictions and experimental results for groove depths in carbon/teflon. Model predictions consistently overestimated depth values for continuous-beam glass/polyester results, and underestimated depth values for pulsed-beam glass/polyester at low power/high speed. Corrections for heat losses and high-temperature chemical interactions were added to the model to improve agreement with data. Groove width and damage width results were compared with surface quality standards for laser cutting of composites.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThree-Dimensional Laser Machining of Composite Materials
dc.typeJournal Paper
dc.journal.volume112
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2903347
dc.journal.fristpage387
dc.journal.lastpage392
dc.identifier.eissn1528-8889
dc.keywordsLasers
dc.keywordsMachining
dc.keywordsComposite materials
dc.keywordsGlass
dc.keywordsPolyester fabrics
dc.keywordsCarbon
dc.keywordsHeat losses
dc.keywordsHigh temperature
dc.keywordsSurface quality
dc.keywordsLaser beams
dc.keywordsLaser cutting AND Materials properties
dc.treeJournal of Engineering Materials and Technology:;1990:;volume( 112 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record