Show simple item record

dc.contributor.authorM. J. Pettigrew
dc.contributor.authorC. E. Taylor
dc.contributor.authorB. S. Kim
dc.date.accessioned2017-05-08T23:30:48Z
dc.date.available2017-05-08T23:30:48Z
dc.date.copyrightNovember, 1989
dc.date.issued1989
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28315#466_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/105853
dc.description.abstractTwo-phase cross-flow exists in many shell-and-tube heat exchangers, such as condensers, reboilers and nuclear steam generators. An understanding of damping and of flow-induced vibration excitation mechanisms is necessary to avoid problems due to excessive tube vibration. Accordingly, we have undertaken an extensive program to study the vibration behavior of tube bundles subjected to two-phase cross-flow. In this paper we present the results of experiments on four tube bundle configurations; namely, normal triangular of pitch over diameter ratio, p/d , of 1.32 and 1.47, and parallel triangular and normal square of p/d of 1.47. The bundles were subjected to air-water mixtures to simulate realistic mass fluxes and vapor qualities corresponding to void fractions from 5 to 99 percent. Hydrodynamic mass and damping are discussed in Part 1 of this series of three papers. We found that hydrodynamic mass is roughly related to the homogeneous mixture density. The damping characteristics of all tube bundles are generally similar. Damping is maximum between 40 and 80 percent void fraction where the damping ratio reaches about 4 percent. The effect of mass flux is generally weak. Design guidelines are proposed for hydrodynamic mass and for damping.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleVibration of Tube Bundles in Two-Phase Cross-Flow: Part 1—Hydrodynamic Mass and Damping
dc.typeJournal Paper
dc.journal.volume111
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3265705
dc.journal.fristpage466
dc.journal.lastpage477
dc.identifier.eissn1528-8978
dc.keywordsDamping
dc.keywordsVibration
dc.keywordsCross-flow
dc.keywordsMixtures
dc.keywordsNuclear reactor steam generators
dc.keywordsPorosity
dc.keywordsShells
dc.keywordsWater
dc.keywordsMechanisms
dc.keywordsCondensers (steam plant)
dc.keywordsDensity
dc.keywordsVapors
dc.keywordsFlux (Metallurgy)
dc.keywordsDesign
dc.keywordsFlow-induced vibrations AND Heat exchangers
dc.treeJournal of Pressure Vessel Technology:;1989:;volume( 111 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record