Show simple item record

dc.contributor.authorT. Wang
dc.date.accessioned2017-05-08T23:30:46Z
dc.date.available2017-05-08T23:30:46Z
dc.date.copyrightNovember, 1989
dc.date.issued1989
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28315#361_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/105839
dc.description.abstractVibration problems in piping systems can manifest themselves in two forms: excessive noise generated from wall flexural vibrations, that in combination with jet noise itself may exceed OSHA limits, and piping system vibration, which could lead to fatigue failure at stress risers. Thus, a comprehensive dynamic forcing function for flow-acoustic-induced vibration on piping system needs to consider both the flexural and system excitation sources. Jet column instabilities and acoustic standing waves are utilized to identify the vibration sources in a large-capacity steam piping system. Initial noise generation originates from approximately six jet diameters downstream of a control valve. It consists of two sharply defined high-frequency sources, the shock cells and the large-scale axisymmetric coherent turbulent structure generated from the nonlinear shear layer instability. These sources effectively excite wall flexural vibrations because of their nonzero net dynamic forcing on pipe “shells.” The compact shock and instability wave noise sources further excite the low-frequency acoustic standing wave in the acoustic duct formed by the discharge piping. The low-frequency acoustic standing wave excites the piping system vibration axially. The piping system was also excited transversely by a more potent vibration source incurred by the spiral mode provoked by a piping elbow. Field observation and measurement of the vibration problem of a large-diameter piping system confirm the prediction.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDynamic Forcing Function for Flow-Acoustic-Induced Vibration
dc.typeJournal Paper
dc.journal.volume111
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3265692
dc.journal.fristpage361
dc.journal.lastpage370
dc.identifier.eissn1528-8978
dc.keywordsAcoustics
dc.keywordsFlow (Dynamics)
dc.keywordsVibration
dc.keywordsPiping systems
dc.keywordsNoise (Sound)
dc.keywordsPipes
dc.keywordsStanding waves
dc.keywordsShock (Mechanics)
dc.keywordsTurbulence
dc.keywordsStress
dc.keywordsWaves
dc.keywordsShear (Mechanics)
dc.keywordsValves
dc.keywordsDucts
dc.keywordsPipeline risers
dc.keywordsShells
dc.keywordsSteam AND Fatigue failure
dc.treeJournal of Pressure Vessel Technology:;1989:;volume( 111 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record