Show simple item record

dc.contributor.authorZ. G. Zhu
dc.contributor.authorG. J. Weng
dc.date.accessioned2017-05-08T23:30:12Z
dc.date.available2017-05-08T23:30:12Z
dc.date.copyrightJanuary, 1989
dc.date.issued1989
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26927#99_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/105527
dc.description.abstractA multiaxial theory of creep deformation for particle-strengthened metal-matrix composites is derived. This derivation is based on the observation that there are two major sources of creep resistance in such a system. The first, or metallurgical effect, arises from the increased difficulty of dislocation motion in the presence of particles and is accounted for by a size- and concentration dependent constitutive equation for the matrix. The second, or mechanics effect, is due to the continuous transfer of stress from the ductile matrix to the hard particles and the corresponding stress redistribution is also incorporated in the derivation. Both power-law creep and exponential creep in the matrix, each involving the transient as well as the steady state, are considered. The constitutive equations thus derived can provide the development of creep strain of the composite under a combined stress. The multiaxial theory is also simplified to a uniaxial one, whose explicit stress-creep strain-time relations at a given concentration of particles are also given by a first- and second-order approximation. The uniaxial theory is used to predict the creep deformation of an oxide-strengthened cobalt, and the results are in reasonably good agreement with the experiment. Finally, it is demonstrated that a simple metallurgical approach without considering the stress redistribution between the two constituent phases, or a simple mechanics approach without using a modified constitutive equation for the metal matrix, may each underestimate the creep resistance of the composite, and, therefore, it is important that both factors be considered in the formulation of such a theory.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCreep Deformation of Particle-Strengthened Metal-Matrix Composites
dc.typeJournal Paper
dc.journal.volume111
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3226440
dc.journal.fristpage99
dc.journal.lastpage105
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsMetals
dc.keywordsComposite materials
dc.keywordsParticulate matter
dc.keywordsStress
dc.keywordsElectrical resistance
dc.keywordsEquations
dc.keywordsSteady state
dc.keywordsCobalt
dc.keywordsConstitutive equations
dc.keywordsApproximation AND Dislocation motion
dc.treeJournal of Engineering Materials and Technology:;1989:;volume( 111 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record