Show simple item record

dc.contributor.authorJ. Shi
dc.contributor.authorJ. J. M. Too
dc.contributor.authorM. Ghoreshy
dc.contributor.authorR. W. Smith
dc.date.accessioned2017-05-08T23:30:12Z
dc.date.available2017-05-08T23:30:12Z
dc.date.copyrightJanuary, 1989
dc.date.issued1989
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26927#26_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/105516
dc.description.abstractAn attempt has been made to develop forgeability criteria based on data obtained from local strain measurements. Nodular case iron has been used as the modelling material because its microstructure may be manipulated to contain near-spherical graphite nodules which are suitable for the study of deformation, foregeability, etc. Cracking will occur under certain deformation conditions which may be determined by following the changes in spherulite/nodule shape and habit. Local strain in any area of interest may be determined by measuring the shape change of the previously spherical nodules in terms of an aspect ratio b/a (a = major axis, b = minor axis of the deformed nodules) from specimens sectioned after deformation. A wide variety of forgeabilities can be obtained by changing the microstructure and composition of the matrix.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Use of Spheroidal Graphite Cast Irons to Develop Forgeability Criteria Based on Local Strain Measurements
dc.typeJournal Paper
dc.journal.volume111
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3226429
dc.journal.fristpage26
dc.journal.lastpage31
dc.identifier.eissn1528-8889
dc.keywordsIrons (Textile pressing)
dc.keywordsGraphite
dc.keywordsStrain measurement
dc.keywordsDeformation
dc.keywordsShapes
dc.keywordsIron
dc.keywordsFracture (Process) AND Modeling
dc.treeJournal of Engineering Materials and Technology:;1989:;volume( 111 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record