Show simple item record

dc.contributor.authorS. R. Swanson
dc.date.accessioned2017-05-08T23:30:10Z
dc.date.available2017-05-08T23:30:10Z
dc.date.copyrightApril, 1989
dc.date.issued1989
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26928#145_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/105498
dc.description.abstractThe formation of matrix microcracks in fiber composite laminates has been widely observed. The present paper addresses the mechanics of this microcracking by means of a shear lag model in conjunction with a Weibull failure criterion for further cracking. This shear lag model considers both shear loading as well as cross-fiber tension in the cracked ply. The reduction in inplane shear and tensile modulus of the cracked ply is computed directly from the model. The increase in applied load required to produce new cracks is computed and shows general agreement with previous experimental results. A general approximate relationship between the applied strain levels and the modulus reduction is presented.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOn the Mechanics of Microcracking in Fiber Composite Laminates Under Combined Stress
dc.typeJournal Paper
dc.journal.volume111
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3226446
dc.journal.fristpage145
dc.journal.lastpage149
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsFibers
dc.keywordsLaminates
dc.keywordsStress
dc.keywordsShear (Mechanics)
dc.keywordsFracture (Materials)
dc.keywordsFracture (Process)
dc.keywordsFailure
dc.keywordsMicrocracks AND Tension
dc.treeJournal of Engineering Materials and Technology:;1989:;volume( 111 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record