Show simple item record

dc.contributor.authorSaurin Majumdar
dc.date.accessioned2017-05-08T23:30:10Z
dc.date.available2017-05-08T23:30:10Z
dc.date.copyrightApril, 1989
dc.date.issued1989
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26928#123_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/105495
dc.description.abstractAvailable creep and creep-fatigue data on type 304 stainless steel are re-examined in the light of recently generated basic cavitation data on the same material. This basic study has shown creep damage to be a highly inhomogeneous phenomenon, both in space and in time. A small fraction of boundaries are so intensely cavitated by about 10–25 percent of life that for all practical purposes they can be considered cracked. Other similar boundaries, that are similarly oriented with respect to the tensile stress direction, however, are almost devoid of cavities at the end of life. The early nucleation of cracks by creep mechanism has a significant influence on creep-fatigue interactions, particularly for tests at low strain ranges. A simple ductility exhaustion model appears to be able to account for the early crack initiation. A hardness-modified ductility approach appears to provide an upper bound to the ductility displayed by all tests and correlates data for long hold-time fatigue tests at low strain range. Tests at higher strain ranges and/or shorter hold times do not achieve their full potential ductility because their lives are cut short by crack propagation. Their lives can be predicted empirically by an enhanced fatigue crack growth equation in the presence of cavitation damage.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleRelationship of Creep, Creep-Fatigue, and Cavitation Damage in Type 304 Austenitic Stainless Steel
dc.typeJournal Paper
dc.journal.volume111
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3226443
dc.journal.fristpage123
dc.journal.lastpage131
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsFatigue
dc.keywordsCavitation
dc.keywordsStainless steel
dc.keywordsDuctility
dc.keywordsFracture (Materials)
dc.keywordsCavities
dc.keywordsCrack propagation
dc.keywordsEquations
dc.keywordsFatigue cracks
dc.keywordsFatigue testing
dc.keywordsNucleation (Physics)
dc.keywordsTension AND Mechanisms
dc.treeJournal of Engineering Materials and Technology:;1989:;volume( 111 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record