Show simple item record

dc.contributor.authorE. H. Jordan
dc.contributor.authorG. J. Meyers
dc.date.accessioned2017-05-08T23:30:09Z
dc.date.available2017-05-08T23:30:09Z
dc.date.copyrightJuly, 1989
dc.date.issued1989
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26929#306_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/105487
dc.description.abstractTwenty-six isothermal crack growth tests were performed on Hastelloy-X tubular specimens at a variety of temperatures and strain ranges. Conditions were selected to include nominally elastic and nominally plastic conditions. A number of parameters including the stress intensity factor, strain intensity factor, J-integral, Crack Opening Displacement, and Tompkins model were examined for their ability to correlate the data. Test conditions were selected such that growth rates at a single value of the parameter were obtained at radically different crack lengths, thus exploring the geometry independence of the correlating parameter. None of the parameters were fully satisfactory. However, COD calculated from J-integral appeared to be the most successful.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFracture Mechanics Applied to Elevated Temperature Crack Growth
dc.typeJournal Paper
dc.journal.volume111
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3226471
dc.journal.fristpage306
dc.journal.lastpage313
dc.identifier.eissn1528-8889
dc.keywordsFracture mechanics
dc.keywordsTemperature
dc.keywordsFracture (Materials)
dc.keywordsDisplacement
dc.keywordsGeometry AND Stress
dc.treeJournal of Engineering Materials and Technology:;1989:;volume( 111 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record