Show simple item record

dc.contributor.authorH. Umeda
dc.contributor.authorM. Sakane
dc.contributor.authorM. Ohnami
dc.date.accessioned2017-05-08T23:30:09Z
dc.date.available2017-05-08T23:30:09Z
dc.date.copyrightJuly, 1989
dc.date.issued1989
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26929#286_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/105484
dc.description.abstractThis paper describes the notch effect in biaxial low cycle fatigue of an austenitic stainless steel SUS 304 at 873K in air. Mises’ equivalent stress controlled fatigue tests were carried out for the three kinds of round notched specimens in push-pull/torsion biaxial stress states. Cracks emanated at the notch root were measured by a d.c. potential drop method. Reduction in the fatigue life due to the notch was most significant in the reversed torsion test in comparison with the push-pull and combined push-pull/reversed torsion tests. The conventional fatigue life prediction methods, i.e., the Neuber’s rule, the Stowell’s method, and the Koe’s method, were applied to the experimental data and the accuracy of the prediction methods were discussed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNotch Effect in Biaxial Low Cycle Fatigue at Elevated Temperatures
dc.typeJournal Paper
dc.journal.volume111
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3226468
dc.journal.fristpage286
dc.journal.lastpage293
dc.identifier.eissn1528-8889
dc.keywordsTemperature
dc.keywordsLow cycle fatigue
dc.keywordsTorsion
dc.keywordsStress
dc.keywordsFatigue life
dc.keywordsFatigue testing
dc.keywordsStainless steel
dc.keywordsDrops AND Fracture (Materials)
dc.treeJournal of Engineering Materials and Technology:;1989:;volume( 111 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record