Show simple item record

dc.contributor.authorM. D. Rajab
dc.contributor.authorA. Zahoor
dc.date.accessioned2017-05-08T23:30:08Z
dc.date.available2017-05-08T23:30:08Z
dc.date.copyrightJuly, 1989
dc.date.issued1989
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26929#243_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/105477
dc.description.abstractCrack associated pipe axial displacement and tearing modulus solutions are derived for pipes containing internal circumferential part-through wall surface flaw under axial tension loading. The tearing modulus solution is derived for both load control and displacement control loadings. The solutions are useful for practical applications involving contained yielding in the crack section. The analytical solutions can be readily applied to pipe radius-to-thickness ratio ranging from 5 to 20. A sensitivity study was performed to assess the influence of flaw size, pipe radius and wall thickness, pipe length, and axial tension load on the applied tearing modulus. Numerical results are presented for critical stress as a function of flaw size for 4130 carbon steel pipe.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCrack Instability in Pipes Containing Internal Surface Flaw
dc.typeJournal Paper
dc.journal.volume111
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3226462
dc.journal.fristpage243
dc.journal.lastpage247
dc.identifier.eissn1528-8889
dc.keywordsFracture (Materials)
dc.keywordsPipes
dc.keywordsStress
dc.keywordsTension
dc.keywordsThickness
dc.keywordsWall thickness
dc.keywordsCarbon steel
dc.keywordsDisplacement AND Displacement control
dc.treeJournal of Engineering Materials and Technology:;1989:;volume( 111 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record