Show simple item record

dc.contributor.authorY. Z. Itoh
dc.contributor.authorH. Kashiwaya
dc.date.accessioned2017-05-08T23:30:08Z
dc.date.available2017-05-08T23:30:08Z
dc.date.copyrightOctober, 1989
dc.date.issued1989
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26931#431_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/105469
dc.description.abstractCompletely reversed, strain-controlled, low-cycle fatigue behavior at room temperature is investigated for steels and their weld metals. Weld metal specimens were taken from multi-pass weld metal deposited by shield metal arc welding (SMAW) and gas metal arc welding (GMAW), such that their gage length consisted entirely of the weld metal. Results indicate that there is a trend toward reduction in the low-cycle fatigue life of weld metals as compared with the base metals. In low carbon steel weld metals, the tendency described above is explained in terms of local plastic strain concentration by lack of uniformity of the multi-pass weld metals. The weld metals do not have the same mechanical properties anywhere as confirmed by hardness distribution, and the fatigue crack grows preferentially through the temper softened region in the multi-pass welds. In Type 308 stainless steel weld metals, the ductility reduction causes reductions in low-cycle fatigue life. This study leads to the conclusion that fairly accurate estimates of the low-cycle fatigue life of weld metals can be obtained using Manson’s universal slope method. However, life estimates of the Type 304 stainless steel is difficult due to a lack of ductility caused by a deformation-induced martensitic transformation.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLow-Cycle Fatigue Properties of Steels and Their Weld Metals
dc.typeJournal Paper
dc.journal.volume111
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3226491
dc.journal.fristpage431
dc.journal.lastpage437
dc.identifier.eissn1528-8889
dc.keywordsMetals
dc.keywordsSteel
dc.keywordsLow cycle fatigue
dc.keywordsStainless steel
dc.keywordsDuctility
dc.keywordsGas metal arc welding
dc.keywordsWelded joints
dc.keywordsMechanical properties
dc.keywordsFatigue cracks
dc.keywordsGages
dc.keywordsArc welding
dc.keywordsCarbon steel
dc.keywordsBase metals
dc.keywordsMartensitic transformations
dc.keywordsDeformation AND Temperature
dc.treeJournal of Engineering Materials and Technology:;1989:;volume( 111 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record