High Temperature Inelastic Deformation Under Uniaxial Loading: Theory and Experiment
| dc.contributor.author | K. S. Chan | |
| dc.contributor.author | S. R. Bodner | |
| dc.contributor.author | K. P. Walker | |
| dc.contributor.author | U. S. Lindholm | |
| dc.date.accessioned | 2017-05-08T23:30:06Z | |
| dc.date.available | 2017-05-08T23:30:06Z | |
| dc.date.copyright | October, 1989 | |
| dc.date.issued | 1989 | |
| dc.identifier.issn | 0094-4289 | |
| dc.identifier.other | JEMTA8-26931#345_1.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/105454 | |
| dc.description.abstract | The elevated temperature, uniaxial inelastic deformation behavior of a Ni-base alloy, B1900 + Hf, has been investigated by performing isothermal tensile, creep, cyclic, stress relaxation, and thermomechanical fatigue tests. The range of strain rates examined are 10−7 to 10−2 s−1 , while the test temperatures range from 25°C to 1093°C. This extensive constitutive data base has been used for evaluating the unified constitutive models of Bodner-Partom and of Walker which apply for the small strain regime. Comparison of test results with independent model predictions indicates good agreement over a broad range of loading conditions demonstrating the applicability of the unified constitutive equation approach for describing the strongly nonlinear, time, and temperature-dependent response of metals under a wide range of deformation and thermal histories. Thus, the results give confidence that the unified approach is an effective and efficient approach in which complex, history-dependent, thermo-viscoplastic flow can be represented within a single inelastic strain-rate term. | |
| dc.publisher | The American Society of Mechanical Engineers (ASME) | |
| dc.title | High Temperature Inelastic Deformation Under Uniaxial Loading: Theory and Experiment | |
| dc.type | Journal Paper | |
| dc.journal.volume | 111 | |
| dc.journal.issue | 4 | |
| dc.journal.title | Journal of Engineering Materials and Technology | |
| dc.identifier.doi | 10.1115/1.3226478 | |
| dc.journal.fristpage | 345 | |
| dc.journal.lastpage | 353 | |
| dc.identifier.eissn | 1528-8889 | |
| dc.keywords | Deformation | |
| dc.keywords | High temperature | |
| dc.keywords | Temperature | |
| dc.keywords | Metals | |
| dc.keywords | Alloys | |
| dc.keywords | Relaxation (Physics) | |
| dc.keywords | Stress | |
| dc.keywords | Constitutive equations | |
| dc.keywords | Databases | |
| dc.keywords | Equations | |
| dc.keywords | Fatigue testing | |
| dc.keywords | Flow (Dynamics) AND Creep | |
| dc.tree | Journal of Engineering Materials and Technology:;1989:;volume( 111 ):;issue: 004 | |
| dc.contenttype | Fulltext |