Show simple item record

dc.contributor.authorF. Fanous
dc.contributor.authorL. Greimann
dc.date.accessioned2017-05-08T23:28:00Z
dc.date.available2017-05-08T23:28:00Z
dc.date.copyrightMay, 1988
dc.date.issued1988
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28301#199_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/104373
dc.description.abstractDuring a severe accident, buckling of a steel containment hatch door, large deformation and ovaling of the hatch sleeve are potential causes of mismatch at the sealing surface which can result in a leakage path. A three-dimensional nonlinear finite element analysis of a typical steel containment/sleeve/hatch assembly that includes containment stiffeners, pretensioned swing bolts, and hatch door geometric imperfection is presented. The analysis was carried out to the nonlinear range up to large strains. The results indicated that the buckling load occurs at pressure, far above that which causes gross yielding of the shell plate. Although buckling of the hatch door increased the relative motions of the hatch sleeve and the hatch door, the motions remained sufficiently small to prevent leakage.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleBehavior of a Nuclear Steel Containment Equipment Hatch at Large Strain
dc.typeJournal Paper
dc.journal.volume110
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3265587
dc.journal.fristpage199
dc.journal.lastpage204
dc.identifier.eissn1528-8978
dc.keywordsSteel
dc.keywordsContainment
dc.keywordsDoors
dc.keywordsBuckling
dc.keywordsMotion
dc.keywordsLeakage
dc.keywordsManufacturing
dc.keywordsSealing (Process)
dc.keywordsStress
dc.keywordsAccidents
dc.keywordsFinite element analysis
dc.keywordsShells
dc.keywordsPressure AND Deformation
dc.treeJournal of Pressure Vessel Technology:;1988:;volume( 110 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record