Show simple item record

dc.contributor.authorK. Kussmaul
dc.contributor.authorR. Gillot
dc.date.accessioned2017-05-08T23:27:59Z
dc.date.available2017-05-08T23:27:59Z
dc.date.copyrightMay, 1988
dc.date.issued1988
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28301#129_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/104362
dc.description.abstractIn order to determine the influence of the test temperature on the crack arrest toughness, investigations were carried out on pressure vessel steels of various strength and toughness up to the upper-shelf of the Charpy V-notch impact energy (CV -energy). The tests were conducted on the basis of the proposed ASTM test method for ferritic steels with modified wedge-loaded compact specimens. The thickness ranged from 0.75–6.69 in. (19–170 mm), the in-plane dimensions from 3.94–15.75 in. (100–400 mm). The comparison with the reference curves of the American and German guidelines showed significant discrepancies at high temperatures.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDetermination of Crack Arrest Toughness at High Temperatures Using Compact Specimens
dc.typeJournal Paper
dc.journal.volume110
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3265577
dc.journal.fristpage129
dc.journal.lastpage136
dc.identifier.eissn1528-8978
dc.keywordsFracture (Materials)
dc.keywordsToughness
dc.keywordsHigh temperature
dc.keywordsSteel
dc.keywordsDimensions
dc.keywordsPressure vessels
dc.keywordsThickness
dc.keywordsASTM International
dc.keywordsWedges AND Temperature
dc.treeJournal of Pressure Vessel Technology:;1988:;volume( 110 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record