Show simple item record

dc.contributor.authorB. S. J. Kang
dc.contributor.authorA. S. Kobayashi
dc.date.accessioned2017-05-08T23:27:59Z
dc.date.available2017-05-08T23:27:59Z
dc.date.copyrightAugust, 1988
dc.date.issued1988
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28303#291_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/104354
dc.description.abstractThe accuracy of the approximate J -estimation procedure evaluated along rectangular contours in the elastic and the HRR crack tip fields was assessed. The path independency of the approximate J ’s in the presence of LEFM and elastic-plastic stress fields was demonstrated experimentally in 7075-T6, 2024-0 and 5052–H32 SEN specimens with small stable crack growth of 1 to 2 mm. HRR field does not exist in a ductile material with relatively large strain-hardening exponent, i.e., N = 15. The approximate J and the COD resistance curves for 2024-0 and 5052-H32 specimens for small crack extension was established. These curves showed little sensitivity to the notch tip acuity due to large plastic yielding.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleJ-Estimation Procedure Based on Moire Interferometry Data
dc.typeJournal Paper
dc.journal.volume110
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3265602
dc.journal.fristpage291
dc.journal.lastpage300
dc.identifier.eissn1528-8978
dc.keywordsInterferometry
dc.keywordsElectrical resistance
dc.keywordsStress
dc.keywordsFracture (Materials) AND Work hardening
dc.treeJournal of Pressure Vessel Technology:;1988:;volume( 110 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record