Show simple item record

dc.contributor.authorM. R. Lindquist
dc.contributor.authorM. J. Anderson
dc.contributor.authorL. K. Severud
dc.contributor.authorE. O. Weiner
dc.date.accessioned2017-05-08T23:27:59Z
dc.date.available2017-05-08T23:27:59Z
dc.date.copyrightAugust, 1988
dc.date.issued1988
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28303#270_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/104351
dc.description.abstractHigh-level dynamic testing of a prototypic insulated small bore diameter pipe system is described. The pipe system was supported by a minimum number of supports, with several combinations of supports and support locations tested. Load input consisted of a dynamic multifrequency time history and sinusoidal loading at increasing acceleration levels until gross deformation of the system occurred. Very high level pipe damping was exhibited when plastic response occurred. Post-test analyses were performed to assess the structural loading and response of the pipe system under the dynamic load input. Several elastic and elasto-plastic analysis failure prediction methods were used, along with simplified inelastic analysis.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHigh Level Dynamic Testing and Analytical Correlations for a Small Bore Piping System
dc.typeJournal Paper
dc.journal.volume110
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3265599
dc.journal.fristpage270
dc.journal.lastpage275
dc.identifier.eissn1528-8978
dc.keywordsDynamic testing (Materials)
dc.keywordsPiping systems
dc.keywordsPipes
dc.keywordsStress
dc.keywordsDeformation
dc.keywordsDamping
dc.keywordsInelastic analysis AND Failure
dc.treeJournal of Pressure Vessel Technology:;1988:;volume( 110 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record