Show simple item record

dc.contributor.authorM. Andersson
dc.contributor.authorB. L. Josefson
dc.date.accessioned2017-05-08T23:27:57Z
dc.date.available2017-05-08T23:27:57Z
dc.date.copyrightNovember, 1988
dc.date.issued1988
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28305#402_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/104331
dc.description.abstractStress redistribution in a butt-welded pipe during later mechanical and thermal treatments is studied numerically by use of a thermoelastoplastic FE-model. It is proposed that the influence of the welding process on the redistribution can be modeled using a simplified approach. Here the welding residual stress field is simulated with an equivalent radial line load. Two standard treatments, one mechanical and one thermal, are studied with this simplified approach. Both treatments are performed after the welding is completed. The calculations show that both treatments can be used to turn (detrimental) tensile welding residual axial stresses on the inner surface at the weld into compressive ones.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleWelding Stress Redistribution in a Butt-Welded Pipe During Later Mechanical and Thermal Loadings
dc.typeJournal Paper
dc.journal.volume110
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3265622
dc.journal.fristpage402
dc.journal.lastpage404
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;1988:;volume( 110 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record