Show simple item record

dc.contributor.authorMasao Sakane
dc.contributor.authorNaomi Hamada
dc.contributor.authorMasateru Ohnami
dc.date.accessioned2017-05-08T23:27:22Z
dc.date.available2017-05-08T23:27:22Z
dc.date.copyrightJanuary, 1988
dc.date.issued1988
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26919#48_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/104005
dc.description.abstractPush-pull and reversed torsion tests were carried out for notched, precracked, and smooth hollow cylindrical specimens of type 304 stainless steel at 923K in air. This paper describes the crack direction in the three types of specimens and the parameter that correlates the biaxial low cycle fatigue failure data. All types of specimens, except the smooth specimen in the reversed torsion test, failed by mode I cracking. Failure life of the specimens was discussed in connection with the crack mode. The equivalent stress based on COD could correlate the biaxial fatigue data whereas the Mises’ equivalent stress and the maximum principal stress could not.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleBiaxial Low Cycle Fatigue for Notched, Cracked, and Smooth Specimens at High Temperatures
dc.typeJournal Paper
dc.journal.volume110
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3226009
dc.journal.fristpage48
dc.journal.lastpage54
dc.identifier.eissn1528-8889
dc.keywordsLow cycle fatigue
dc.keywordsHigh temperature
dc.keywordsStress
dc.keywordsTorsion
dc.keywordsFracture (Materials)
dc.keywordsFracture (Process)
dc.keywordsFailure
dc.keywordsFailure data
dc.keywordsFatigue AND Stainless steel
dc.treeJournal of Engineering Materials and Technology:;1988:;volume( 110 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record