Show simple item record

dc.contributor.authorK. Kokini
dc.contributor.authorT. R. Hornack
dc.date.accessioned2017-05-08T23:27:22Z
dc.date.available2017-05-08T23:27:22Z
dc.date.copyrightJanuary, 1988
dc.date.issued1988
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26919#35_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/104003
dc.description.abstractThe effect of a transient thermal load on a coating which is bonded to a cylindrical substrate is analyzed using fracture mechanics by considering the presence of a circumferential edge crack normal to the inner boundary of the coating. The solution is obtained using the finite element method and is compared to the exact solution of the problem. The analysis is then used to show that smaller heat transfer rates at the boundary result in smaller stress intensity factors. For three different materials combinations, including two ceramic coatings on metal, the nondimensional stress intensity factor has a similar magnitude for short crack lengths, but varies appreciably as the crack length becomes longer. It is also determined that inner coatings result in smaller or comparable stress intensity factors than thicker ones.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTransient Thermal Load Effects on Coatings Bonded to Cylindrical Substrates and Containing Circumferential Cracks
dc.typeJournal Paper
dc.journal.volume110
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3226007
dc.journal.fristpage35
dc.journal.lastpage40
dc.identifier.eissn1528-8889
dc.keywordsCoatings
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsCoating processes
dc.keywordsFinite element methods
dc.keywordsCeramic coatings
dc.keywordsFracture mechanics
dc.keywordsHeat transfer AND Metals
dc.treeJournal of Engineering Materials and Technology:;1988:;volume( 110 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record