Show simple item record

dc.contributor.authorN. Laws
dc.contributor.authorJ. R. Brockenbrough
dc.date.accessioned2017-05-08T23:27:19Z
dc.date.available2017-05-08T23:27:19Z
dc.date.copyrightApril, 1988
dc.date.issued1988
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26921#101_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/103977
dc.description.abstractA polycrystalline brittle solid may undergo grain boundary micro-cracking due to residual stresses or applied load. This paper contains some results pertaining to the loss of macroscopic stiffness of such solids when all micro-cracks are open and when some may be closed and be subject to frictional sliding. Two specific models are investigated: first micro-cracking on the grain boundaries of a regular hexagonal array, second, micro-cracks which are randomly located and oriented. It is shown that for many purposes the two models give identical results. The paper concludes with some analysis of the possible toughening due to process zone micro-cracking at the tip of a macroscopic crack. It is found that toughening can only occur if the saturation crack density is very large.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMicrocracking in Polycrystalline Solids
dc.typeJournal Paper
dc.journal.volume110
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3226014
dc.journal.fristpage101
dc.journal.lastpage104
dc.identifier.eissn1528-8889
dc.keywordsSolids
dc.keywordsFracture (Process)
dc.keywordsMicrocracks
dc.keywordsFracture (Materials)
dc.keywordsGrain boundaries
dc.keywordsResidual stresses
dc.keywordsStress
dc.keywordsBrittleness
dc.keywordsDensity AND Stiffness
dc.treeJournal of Engineering Materials and Technology:;1988:;volume( 110 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record