Show simple item record

dc.contributor.authorW. J. Mills
dc.contributor.authorL. D. Blackburn
dc.date.accessioned2017-05-08T23:27:18Z
dc.date.available2017-05-08T23:27:18Z
dc.date.copyrightJuly, 1988
dc.date.issued1988
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26922#286_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/103971
dc.description.abstractHeat-to-heat and product-form variations in the JIc fracture toughness of Alloy 718 were examined at 24°C, 427°C, and 538°C using the multiple-specimen JR -curve method. Five different material heats along with three product forms from one of the heats were tested in the conventional heat-treatment condition. Statistical analysis revealed only two significantly different JIc levels of 48 kJ/m2 and 74 kJ/m2 for these materials. These two mean JIc levels were independent of temperature. A minimum-expected JIc level based on a tolerance interval bracketing 90 percent of the lower JIc population at a 95 percent confidence level was evaluated as 33 kJ/m2 . Coarse δ precipitates controlled the fracture properties by initiating secondary dimples that pre-empted continued growth of primary dimples nucleated by broken carbide inclusions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFracture Toughness Variations in Alloy 718
dc.typeJournal Paper
dc.journal.volume110
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3226050
dc.journal.fristpage286
dc.journal.lastpage293
dc.identifier.eissn1528-8889
dc.keywordsFracture toughness
dc.keywordsIndium alloys
dc.keywordsHeat
dc.keywordsTemperature
dc.keywordsAlloys
dc.keywordsHeat treating (Metalworking)
dc.keywordsFracture (Process) AND Statistical analysis
dc.treeJournal of Engineering Materials and Technology:;1988:;volume( 110 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record