Show simple item record

dc.contributor.authorH. Bernstein
dc.contributor.authorC. Loeby
dc.date.accessioned2017-05-08T23:27:16Z
dc.date.available2017-05-08T23:27:16Z
dc.date.copyrightJuly, 1988
dc.date.issued1988
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26922#234_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/103962
dc.description.abstractLow-cycle fatigue tests were conducted under strain control in salt water on 2024 aluminum, 304 stainless steel, and 1045 steel. All three materials showed a significant reduction in life due to corrosion fatigue in the low-cycle fatigue regime. The corrosion fatigue life of the aluminum and steel was time dependent, with significantly shorter lives at lower frequencies or at longer strain hold times. The corrosion fatigue life of the stainless steel was not time dependent for the conditions studied. Elastic and plastic strain-range versus life equations were modified by a frequency term to predict the corrosion fatigue life. This model correlated the fatigue data to within a factor of 1.28. A modification of this model correlated some corrosion fatigue data in the literature to within a factor of 1.19.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLow-Cycle Corrosion Fatigue of Three Engineering Alloys in Salt Water
dc.typeJournal Paper
dc.journal.volume110
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3226042
dc.journal.fristpage234
dc.journal.lastpage239
dc.identifier.eissn1528-8889
dc.keywordsFatigue
dc.keywordsAlloys
dc.keywordsCorrosion
dc.keywordsCycles
dc.keywordsWater
dc.keywordsFatigue life
dc.keywordsSteel
dc.keywordsAluminum
dc.keywordsLow cycle fatigue
dc.keywordsStainless steel
dc.keywordsFrequency AND Equations
dc.treeJournal of Engineering Materials and Technology:;1988:;volume( 110 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record