Show simple item record

dc.contributor.authorM. Yoda
dc.date.accessioned2017-05-08T23:27:15Z
dc.date.available2017-05-08T23:27:15Z
dc.date.copyrightJuly, 1988
dc.date.issued1988
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26922#219_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/103960
dc.description.abstractThe glass plate specimens with inclined cracks introduced by Vickers microhardness indentation were subjected to sustained bend stress in water. Subcritical crack growth behaviors were investigated under combined Modes I and II loading. The crack velocity dc/dt can be described as a function of coplanar energy release rate G. The experimental results show that the dc/dt which is initially high decreases and thereafter increases with G. The crack velocity data are found to be influenced by the residual stress and the presence of a lateral crack. Inclined cracks in the increasing region tend to show the crack velocity higher than would be expected from the Mode I results of β = 90 deg on the basis of G as the β between the loading axis and the crack plane decreases. The dc/dt-G curves in this region have a steeper portion at low velocities and thereafter tend to a shallower portion.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSubcritical Crack Growth of Glass Under Combined Modes I and II Loading
dc.typeJournal Paper
dc.journal.volume110
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3226040
dc.journal.fristpage219
dc.journal.lastpage223
dc.identifier.eissn1528-8889
dc.keywordsGlass
dc.keywordsFracture (Materials)
dc.keywordsStress
dc.keywordsMicrohardness AND Water
dc.treeJournal of Engineering Materials and Technology:;1988:;volume( 110 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record