Show simple item record

dc.contributor.authorY. C. Liu
dc.date.accessioned2017-05-08T23:27:15Z
dc.date.available2017-05-08T23:27:15Z
dc.date.copyrightOctober, 1988
dc.date.issued1988
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26923#389_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/103952
dc.description.abstractQuantitative relationships have been obtained between restraining force and shape deviations, such as springback and side wall curl, in flanged channels made of SKDQ and high strength streets. It is observed that shape deviation is greatly reduced if the applied restraining force is beyond the yield strength of the material. However, due to the restriction of die entrance and punch corners, this condition cannot be readily achieved in the conventional bead system as side wall fracture intervenes. To circumvent this constraint, a so-named “intermediate restraining” process has been developed to form high quality flanged channels in one single operation. The suggested process is displacement controlled and, in practice, should be applicable to any material once its physical properties are known.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effect of Restraining Force on Shape Deviations in Flanged Channels
dc.typeJournal Paper
dc.journal.volume110
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3226067
dc.journal.fristpage389
dc.journal.lastpage394
dc.identifier.eissn1528-8889
dc.keywordsForce
dc.keywordsChannels (Hydraulic engineering)
dc.keywordsShapes
dc.keywordsYield strength
dc.keywordsCorners (Structural elements)
dc.keywordsFracture (Process)
dc.keywordsDisplacement AND Roads
dc.treeJournal of Engineering Materials and Technology:;1988:;volume( 110 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record