Show simple item record

dc.contributor.authorG. S. Schajer
dc.date.accessioned2017-05-08T23:27:13Z
dc.date.available2017-05-08T23:27:13Z
dc.date.copyrightOctober, 1988
dc.date.issued1988
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26923#344_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/103943
dc.description.abstractThe Integral Method for calculating non-uniform residual stress fields using strain relaxation data from the incremental hole-drilling method is examined in detail. Finite element calculations are described which evaluate the calibration coefficients required for practical applications of the method. These calibration data are tabulated for a range of hole sizes and depths. It is found that the hole drilling method is not well adapted to measuring stresses remote from the surface, and a theoretical depth limit for stress measurements of 0.5 of the mean radius of the strain gauge rosette, rm , is identified. A practical depth limit is in the range 0.3–0.4 rm .
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMeasurement of Non-Uniform Residual Stresses Using the Hole-Drilling Method. Part II—Practical Application of the Integral Method
dc.typeJournal Paper
dc.journal.volume110
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3226060
dc.journal.fristpage344
dc.journal.lastpage349
dc.identifier.eissn1528-8889
dc.keywordsDrilling
dc.keywordsResidual stresses
dc.keywordsStress
dc.keywordsCalibration
dc.keywordsStrain gages
dc.keywordsMeasurement
dc.keywordsFinite element analysis AND Relaxation (Physics)
dc.treeJournal of Engineering Materials and Technology:;1988:;volume( 110 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record