Show simple item record

dc.contributor.authorT. E. Wong
dc.contributor.authorG. C. Johnson
dc.date.accessioned2017-05-08T23:27:13Z
dc.date.available2017-05-08T23:27:13Z
dc.date.copyrightOctober, 1988
dc.date.issued1988
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26923#332_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/103941
dc.description.abstractThe variation in Young’s modulus and Poisson’s ratio of metals during uniaxial deformation is examined. Predictions are made on the basis of a nonlinear description of the constitutive relation between stress and strain involving both second- and third-order elastic constants. A comparison of measured and predicted variations shows good agreement, with the relative change in Young’s modulus being on the order of 10 times the elastic strain for most metals. The material nonlinearity is then examined as a possible cause for changes in the natural frequency of a beam subject to an axial residual stress. An upper bound for the frequency change involving the maximum stress, initial Young’s modulus and a nonlinearity parameter is derived.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOn the Effects of Elastic Nonlinearity in Metals
dc.typeJournal Paper
dc.journal.volume110
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3226058
dc.journal.fristpage332
dc.journal.lastpage337
dc.identifier.eissn1528-8889
dc.keywordsMetals
dc.keywordsStress
dc.keywordsElasticity
dc.keywordsDeformation
dc.keywordsPoisson ratio AND Elastic constants
dc.treeJournal of Engineering Materials and Technology:;1988:;volume( 110 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record