Show simple item record

dc.contributor.authorJ. Duffy
dc.contributor.authorS. Suresh
dc.contributor.authorK. Cho
dc.contributor.authorE. R. Bopp
dc.date.accessioned2017-05-08T23:27:13Z
dc.date.available2017-05-08T23:27:13Z
dc.date.copyrightOctober, 1988
dc.date.issued1988
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26923#325_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/103940
dc.description.abstractAn experimental method is described whereby the dynamic fracture initiation toughness of ceramics and ceramic composites can be measured in pure tension or pure torsion at stress intensity factor rates of 105 to 106 MPam/s. In this procedure, circumferentially notched cylindrical rods are subjected to uniaxial cyclic compression at room temperature to introduce a self-arresting, concentric Mode I fatigue pre-crack, following the technique presented by Suresh et al. (1987) and Suresh and Tschegg (1987). Subsequently, dynamic fracture initiation is effected by stress wave loading with a sharp-fronted pulse which subjects the specimen to a dynamic load inducing either Mode I or Mode III fracture. Instrumentation appropriate to the loading mode provides a record of average stress at the fracture site as a function of time. The capability of this method to yield highly reproducible dynamic fracture initiation toughness values for ceramics is demonstrated with the aid of experiments conducted on a polycrystalline aluminum oxide. The dynamic fracture toughness values are compared with the results obtained for quasi-static Mode I and Mode III fracture in the ceramic material at stress intensity factor rates of 10−1 to 1 MPam/s. Guidelines for the dynamic fracture initiation testing of ceramics and ceramic composites are discussed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Method for Dynamic Fracture Initiation Testing of Ceramics
dc.typeJournal Paper
dc.journal.volume110
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3226057
dc.journal.fristpage325
dc.journal.lastpage331
dc.identifier.eissn1528-8889
dc.keywordsCeramics
dc.keywordsFracture (Process)
dc.keywordsTesting
dc.keywordsStress
dc.keywordsCeramic composites
dc.keywordsToughness
dc.keywordsCompression
dc.keywordsFracture toughness
dc.keywordsRods
dc.keywordsTension
dc.keywordsFatigue
dc.keywordsTemperature
dc.keywordsAluminum
dc.keywordsWaves
dc.keywordsTorsion AND Instrumentation
dc.treeJournal of Engineering Materials and Technology:;1988:;volume( 110 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record