Show simple item record

dc.contributor.authorR. Viswanathan
dc.contributor.authorS. M. Bruemmer
dc.contributor.authorR. H. Richman
dc.date.accessioned2017-05-08T23:27:13Z
dc.date.available2017-05-08T23:27:13Z
dc.date.copyrightOctober, 1988
dc.date.issued1988
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26923#313_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/103938
dc.description.abstractThe toughness of low alloy steel components can degrade in service due to temper embrittlement. This embrittlement is caused by segregation of impurity elements to the grain boundaries of the steel. Nondestructive techniques are needed to assess the extent of toughness degradation, since this information is vital in making run-retire decisions. EPRI has successfully completed evaluation of a chemical etching technique for determining the change in the fracture appearance transition temperature (Δ FATT) of rotor steels. Laboratory steels and core samples removed from actual rotors, with varying degrees of embrittlement, have been evaluated. Depths of grain boundary grooves, produced by chemical etching, correlate well with Δ FATT and with the grain boundary coverage of impurity elements as determined by Auger spectroscopy. To render the technique even more nondestructive, a 3-stage replica technique has been developed. Groove depths measured from replicas of etched samples also yield an excellent correlation with the Δ FATT of the samples.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEtching Technique for Assessing Toughness Degradation of In-Service Components
dc.typeJournal Paper
dc.journal.volume110
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3226055
dc.journal.fristpage313
dc.journal.lastpage318
dc.identifier.eissn1528-8889
dc.keywordsEtching
dc.keywordsToughness
dc.keywordsEmbrittlement
dc.keywordsGrain boundaries
dc.keywordsSteel
dc.keywordsChemical etching
dc.keywordsRotors
dc.keywordsFracture (Process)
dc.keywordsSpectroscopy
dc.keywordsAlloy steel
dc.keywordsAugers AND Phase transition temperature
dc.treeJournal of Engineering Materials and Technology:;1988:;volume( 110 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record