Show simple item record

dc.contributor.authorR. Gubernat
dc.contributor.authorJ. R. Rinderle
dc.date.accessioned2017-05-08T23:27:13Z
dc.date.available2017-05-08T23:27:13Z
dc.date.copyrightOctober, 1988
dc.date.issued1988
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26923#305_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/103937
dc.description.abstractPart distortion during sintering results from nonhomogeneous and nonisotropic shrinkage. Shrinkage is highly dependent on density and particle size distributions within a part, thus, “shrinkage factors” are not constant and may vary throughout the part. An energy based approach is presented which can be used to form accurate shrinkage laws for eventual use in a finite element solution of part shape change. This energy method can be easily modified to include the important effects of particle size variations, contact forces and irregular particle shape in the formation of accurate of shrinkage laws. Linear particle shrinkage and rotations due to contact stresses are examined using simple two particle geometries to test the validity of the approach. Energy methods give results which agree well with observation and the direct application of the diffusion equation, however, the advantage of this formulation over traditional diffusion based analysis will be fully realized in the eventual task of specifying time dependent shrinkage laws of realistic multi particle models.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Energy Based Approach Toward Determining Part Shape Change During the Sintering of Ceramic Parts
dc.typeJournal Paper
dc.journal.volume110
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3226054
dc.journal.fristpage305
dc.journal.lastpage312
dc.identifier.eissn1528-8889
dc.keywordsCeramics
dc.keywordsSintering
dc.keywordsShapes
dc.keywordsShrinkage (Materials)
dc.keywordsParticulate matter
dc.keywordsDiffusion (Physics)
dc.keywordsParticle size
dc.keywordsDensity
dc.keywordsForce
dc.keywordsFinite element analysis
dc.keywordsEquations AND Stress
dc.treeJournal of Engineering Materials and Technology:;1988:;volume( 110 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record