Show simple item record

dc.contributor.authorY. Morita
dc.contributor.authorH. Kawashima
dc.contributor.authorK. Ishihara
dc.date.accessioned2017-05-08T23:27:03Z
dc.date.available2017-05-08T23:27:03Z
dc.date.copyrightMarch, 1988
dc.date.issued1988
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26421#27_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/103809
dc.description.abstractHigh tensile strength is one of the most important requirements for threaded pipe joints used in oil or gas-producing wells. If an excessively large tensile load is applied to the joints, a jump-out phenomenon of the pipe from the coupling occurs. The jump-out phenomenon depends largely on the thread profile, the nonlinear material properties and the contact condition at threads. In this paper, as a fundamental study, the jump-out behavior of a one-ring thread model was experimentally investigated and the FEM simulation was conducted considering the material nonlinearity and the contact condition at threads. Here, the penalty function method was applied as a technique of introducing contact condition into a large deformation elasto-plastic FEM code CAPS, which has been developed by the authors. A jump-out test of actual 473.1-mm-(18-5/8-in-) dia joint was carried out, and based on the experimental results, one criterion was proposed for the slide out of helicoidal thread in FEM simulation. As a result, the present FEM simulation method can be applied to the analysis of the jump-out phenomenon of the threaded joint.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFinite Element Simulation of Jump-Out Behavior of Threaded Pipe Joints Used in Oil-Producing Wells
dc.typeJournal Paper
dc.journal.volume110
dc.journal.issue1
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3231357
dc.journal.fristpage27
dc.journal.lastpage33
dc.identifier.eissn1528-8994
dc.keywordsPipe joints
dc.keywordsWells
dc.keywordsSimulation
dc.keywordsFinite element analysis
dc.keywordsThread
dc.keywordsFinite element methods
dc.keywordsFinite element model
dc.keywordsTensile strength
dc.keywordsDeformation
dc.keywordsMaterials properties
dc.keywordsPipes AND Stress
dc.treeJournal of Energy Resources Technology:;1988:;volume( 110 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record