Show simple item record

dc.contributor.authorM. K. Yeh
dc.contributor.authorS. Kyriakides
dc.date.accessioned2017-05-08T23:27:02Z
dc.date.available2017-05-08T23:27:02Z
dc.date.copyrightMarch, 1988
dc.date.issued1988
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26421#1_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/103805
dc.description.abstractThe paper describes a series of full-scale collapse experiments using X-42 and X-65 grade steel tubes. The initial geometric imperfections of the tubes were measured using a specially designed scanning facility prior to collapsing them under external pressure. Geometric deviations from a circular shape were recorded at 90 points around the circumference. The wall thickness was also recorded at the same points. At least 31 circumferential scans were made over lengths of 9 diameters. The stress-strain characteristics in the axial and circumferential directions were measured for each tube. The measured parameters were used to calculate numerically the collapse pressures of the tubes. The biggest deviation between the experimental and calculated values was less than 8 percent. These are compared with the results obtained from the same analysis using various idealized imperfection measures.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCollapse of Deepwater Pipelines
dc.typeJournal Paper
dc.journal.volume110
dc.journal.issue1
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3231355
dc.journal.fristpage1
dc.journal.lastpage11
dc.identifier.eissn1528-8994
dc.keywordsPipelines
dc.keywordsCollapse
dc.keywordsExternal pressure
dc.keywordsShapes
dc.keywordsWall thickness
dc.keywordsSteel AND Stress
dc.treeJournal of Energy Resources Technology:;1988:;volume( 110 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record