Show simple item record

dc.contributor.authorR. G. Sauvé
dc.contributor.authorW. W. Teper
dc.date.accessioned2017-05-08T23:25:35Z
dc.date.available2017-05-08T23:25:35Z
dc.date.copyrightFebruary, 1987
dc.date.issued1987
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28281#70_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102951
dc.description.abstractThe occurrence of flow-induced vibration fretting wear in process equipment such as heat exchangers and steam generators accounts for the majority of the failures due to vibration. One of the parameters which plays a vital role in the prediction of tube wear rate is the impact force which occurs when the free displacements of the tube exceed the clearance in the support plates, resulting in a collision. To date the determination of these impact forces reported in the literature has been restricted to simplified mathematical models which consider only straight spans of tube with gaps. The need to consider more generalized configurations has led to the development of an analytical method which simulates the nonlinear dynamic-impact response of multi-supported tubes including U-bends and the effect of nonuniform gap clearances at the supports. The approach is incorporated into a computer code based on the finite element and displacement methods using an unconditionally stable numerical integration scheme to solve the nonlinear equations of motion. The algorithm developed includes equilibrium iteration and variable time stepping based on convergence criteria, which ensures that temporal solution errors are minimized. The direct integration of the equations enables all the frequencies (subject to the finite element mesh) to be included. This is necessary since the high-frequency response at impacting may be significant. At present, the method is being used to simulate impact between tubes and support plates in steam generators and heat exchangers in order to determine tube bundle susceptibility to fretting wear failure at the design stage or operational phase. The paper describes the analytical development of the method, verification cases, and applications to the problem of tube/support plate impacting.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleImpact Simulation of Process Equipment Tubes and Support Plates—A Numerical Algorithm
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264858
dc.journal.fristpage70
dc.journal.lastpage79
dc.identifier.eissn1528-8978
dc.keywordsSimulation
dc.keywordsAlgorithms
dc.keywordsPlates (structures)
dc.keywordsWear
dc.keywordsBoilers
dc.keywordsFinite element analysis
dc.keywordsForce
dc.keywordsHeat exchangers
dc.keywordsFailure
dc.keywordsFrequency
dc.keywordsNonlinear equations
dc.keywordsFlow-induced vibrations
dc.keywordsVibration
dc.keywordsComputers
dc.keywordsArches
dc.keywordsDisplacement
dc.keywordsEquations
dc.keywordsErrors
dc.keywordsDesign
dc.keywordsMotion
dc.keywordsCollisions (Physics)
dc.keywordsEquilibrium (Physics) AND Clearances (Engineering)
dc.treeJournal of Pressure Vessel Technology:;1987:;volume( 109 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record