Show simple item record

dc.contributor.authorG. D. Galletly
dc.contributor.authorS. James
dc.contributor.authorJ. Kruzelecki
dc.contributor.authorK. Pemsing
dc.date.accessioned2017-05-08T23:25:34Z
dc.date.available2017-05-08T23:25:34Z
dc.date.copyrightFebruary, 1987
dc.date.issued1987
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28281#10_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102941
dc.description.abstractThe results of 40 buckling tests on unstiffened welded steel cylindrical shells subjected to combined axial compression and external lateral pressure are compared in the paper with the predictions of theory and various Codes (ASME III, DnV and ECCS). The radius/thickness ratios of the models tested were R /t ≈ 100 and 300 and the length/radius ratios covered the range 0.18 < L /R < 1.45. Three interaction equations were studied, viz. a linear, a quadratic and a linear/quadratic equation suggested recently by Odland. Best agreement with experiment was obtained using the quadratic equation in conjunction with the DnV or ASME III Codes. The ECCS predictions of buckling stress were safe but were more conservative than the other two Codes. Some interactive buckling tests on ring-stiffened cylinders (and conducted recently by other workers) were also compared with the predictions of the above three Codes. The agreement between predicted buckling stresses and test results was broadly similar to that found for the Liverpool models. For very short unstiffened and ring-stiffened cylindrical shells, the theoretical interaction curves were a little unusual. In addition, the test results for external lateral pressure alone on these shells, and obtained by different research groups, did not all agree.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInteractive Buckling Tests on Cylinders Subjected to External Pressure and Axial Compression
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264842
dc.journal.fristpage10
dc.journal.lastpage18
dc.identifier.eissn1528-8978
dc.keywordsBuckling
dc.keywordsCompression
dc.keywordsCylinders
dc.keywordsExternal pressure
dc.keywordsEquations
dc.keywordsPressure
dc.keywordsStress
dc.keywordsPipes
dc.keywordsSteel
dc.keywordsShells AND Thickness
dc.treeJournal of Pressure Vessel Technology:;1987:;volume( 109 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record