Show simple item record

dc.contributor.authorE. Contesti
dc.contributor.authorG. Cailletaud
dc.contributor.authorC. Levaillant
dc.date.accessioned2017-05-08T23:25:33Z
dc.date.available2017-05-08T23:25:33Z
dc.date.copyrightMay, 1987
dc.date.issued1987
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28286#228_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102936
dc.description.abstractCreep-rupture tests on notched specimens of 17–12 SPH stainless steel are performed at elevated temperature (600°C). Metallographic examination allows the quantitative estimation of the intergranular cracking damage occurring during creep tests. Numerical computations based on currently used rupture criteria are performed and compared to both intergranular damage profile and creep life. With regards to the intergranular damage profile measured by interrupting tests on the 1-mm notch radius specimen, Von Mises stress criterion does not predict the experimental location of the maximum damage, because of the influence of stress-triaxiality on the rupture process.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCreep Damage in 17–12 SPH Stainless Steel Notched Specimens: Metallographical Study and Numerical Modeling
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264901
dc.journal.fristpage228
dc.journal.lastpage235
dc.identifier.eissn1528-8978
dc.keywordsComputer simulation
dc.keywordsCreep
dc.keywordsStainless steel
dc.keywordsRupture
dc.keywordsStress
dc.keywordsFracture (Process)
dc.keywordsComputation AND Temperature
dc.treeJournal of Pressure Vessel Technology:;1987:;volume( 109 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record