Show simple item record

dc.contributor.authorJ. M. Corum
dc.contributor.authorW. K. Sartory
dc.date.accessioned2017-05-08T23:25:32Z
dc.date.available2017-05-08T23:25:32Z
dc.date.copyrightMay, 1987
dc.date.issued1987
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28286#160_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102924
dc.description.abstractA mature design methodology, consisting of inelastic analysis methods provided in U.S. Department of Energy guidelines and failure criteria contained in ASME Code Case N-47, exists in the United States for high-temperature reactor components. The objective of this paper is to assess the adequacy of that overall methodology by comparing predicted inelastic deformations and lifetimes with observed results from structural failure tests and from an actual service failure. Comparisons are presented for three structural cases: 1) nozzle-to-spherical shell specimens, emphasizing stresses at structural discontinuities; 2) welded structures, emphasizing metallurgical discontinuities; and 3) thermally loaded cylinders and pipes, emphasizing thermal discontinuities. The comparisons between predicted and measured inelastic responses are generally reasonable; quantities are sometimes overpredicted somewhat and sometimes underpredicted. However, even seemingly small discrepancies in predicted stresses and strains can have a significant effect on life, which is thus not always as closely predicted. For a few cases, the lifetimes are substantially overpredicted, which raises questions regarding the methodology and/or the adequacy of the current design margins.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAssessment of Current High-Temperature Design Methodology Based on Structural Failure Tests
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264890
dc.journal.fristpage160
dc.journal.lastpage168
dc.identifier.eissn1528-8978
dc.keywordsStructural failures
dc.keywordsDesign methodology
dc.keywordsHigh temperature
dc.keywordsFailure
dc.keywordsStress
dc.keywordsDeformation
dc.keywordsDesign
dc.keywordsInelastic analysis
dc.keywordsNozzles
dc.keywordsPipes
dc.keywordsCylinders
dc.keywordsShells AND ASME Standards
dc.treeJournal of Pressure Vessel Technology:;1987:;volume( 109 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record