Show simple item record

dc.contributor.authorP. J. Leavesley
dc.contributor.authorC. E. Knight
dc.date.accessioned2017-05-08T23:25:31Z
dc.date.available2017-05-08T23:25:31Z
dc.date.copyrightAugust, 1987
dc.date.issued1987
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28291#352_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102906
dc.description.abstractThe potential strength degradation of a filament wound sphere was predicted using an incremental finite element model of the composite during fabrication. The sphere was modeled taking into account the winding pattern and the resulting internal layer boundaries. The thickness profile of the sphere’s layers were computed using a pattern simulation program. The total thickness profile and layer thickness profiles were used by the mesh generating program to ensure that the elements generated matched layer boundaries. The elements were isoparametric quadrilaterals which were collapsed to triangular elements for transitions. The main feature of the finite element program was the incremental construction and loading of the model to simulate the winding process. Strength degradation definitely occurs when the average fiber strain in any layer is negative. The negative strain means that all the winding tension has been lost from the layer, and the imposition of compressive strain causes fibers in uncured resin to wrinkle or buckle. Then when the resin cures the buckled region of fibers are degraded in strength. An analysis of a Kevlar/epoxy sphere demonstrated that strength degradation could occur. The innermost layers showed significant tension loss and compressive strain during fabrication which would produce strength degradation. The model sphere was a typical thick wall construction using normal processing conditions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Analytical Model of Strength Loss in Filament Wound Spherical Vessels
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264877
dc.journal.fristpage352
dc.journal.lastpage356
dc.identifier.eissn1528-8978
dc.keywordsComposite materials
dc.keywordsFibers
dc.keywordsManufacturing
dc.keywordsSimulation
dc.keywordsConstruction
dc.keywordsEpoxy adhesives
dc.keywordsFinite element analysis
dc.keywordsFinite element model
dc.keywordsResins
dc.keywordsTension
dc.keywordsThickness
dc.keywordsVessels AND Winding (process)
dc.treeJournal of Pressure Vessel Technology:;1987:;volume( 109 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record