Show simple item record

dc.contributor.authorJ. H. Cha
dc.contributor.authorM. W. Wambsganss
dc.contributor.authorJ. A. Jendrzejczyk
dc.date.accessioned2017-05-08T23:25:30Z
dc.date.available2017-05-08T23:25:30Z
dc.date.copyrightAugust, 1987
dc.date.issued1987
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28291#265_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102891
dc.description.abstractThe objective of this study is to provide qualitative impact/fretting wear information for heat exchanger tubes through the performance of a series of tests involving the pertinent parameters: force between the tube and its support; tube to support plate hole clearance; tube support plate thickness; preload; and tube vibration frequency. The characteristics of impact/fretting wear relative to material combinations and fluid environment were also investigated. The test apparatus consists of a cantilevered tube with a simulated tube support plate at the “free end.” Tube vibration is induced by an electromagnetic exciter to simulate the flow-induced tube motion occurring in a real heat exchanger at the tube/tube support plate interface. Tests are conducted in air, water, and oil, all at room temperature. Removable wear rings are attached to the tube free end and simulated support fixture. Wear ring materials include carbon steel, 304 stainless steel, Inconel 600 and brass. Wear is measured by a weight loss technique and wear rates are calculated and reported as functions of the various pertinent parameters. Based on the test results, general conclusions are drawn.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental Study on Impact/Fretting Wear in Heat Exchanger Tubes
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264862
dc.journal.fristpage265
dc.journal.lastpage274
dc.identifier.eissn1528-8978
dc.keywordsWear
dc.keywordsHeat exchangers
dc.keywordsVibration
dc.keywordsFunctions
dc.keywordsStainless steel
dc.keywordsThickness
dc.keywordsWater
dc.keywordsWeight (Mass)
dc.keywordsForce
dc.keywordsFlow (Dynamics)
dc.keywordsTemperature
dc.keywordsFluids
dc.keywordsBrass (Metal)
dc.keywordsMotion
dc.keywordsCarbon steel
dc.keywordsOscillating frequencies
dc.keywordsJigs and fixtures AND Clearances (Engineering)
dc.treeJournal of Pressure Vessel Technology:;1987:;volume( 109 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record