Show simple item record

dc.contributor.authorA. K. Dhalla
dc.date.accessioned2017-05-08T23:25:29Z
dc.date.available2017-05-08T23:25:29Z
dc.date.copyrightNovember, 1987
dc.date.issued1987
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28294#394_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102876
dc.description.abstractA nonlinear analysis procedure is validated in this paper to predict deformation response, up to collapse, of thin-walled Liquid Metal Reactor (LMR) piping elbows. Nonlinear shell analysis predictions are compared with experimental measurements of two full-scale large diameter (406 mm), thin-walled (D /t = 38), piping elbows tested at room temperature and at an elevated temperature in the Multi-Load Test Facility (MLTF) at Westinghouse. The overall and local deformation predictions agree very well with the measured deformation responses up to 60 percent of the measured plastic collapse moment, M pc e . The analytical-experimental correlation is reasonable up to 0.8 M pc e . At higher load levels the correlation is not as good; at collapse the analysis overpredicts measured deformations by as much as 30 percent.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCollapse Characteristics of a Thin-Walled Elbow: Validation of an Analytical Procedure
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264922
dc.journal.fristpage394
dc.journal.lastpage401
dc.identifier.eissn1528-8978
dc.keywordsCollapse
dc.keywordsDeformation
dc.keywordsTemperature
dc.keywordsStress
dc.keywordsPipes
dc.keywordsShells
dc.keywordsTest facilities
dc.keywordsMeasurement AND Liquid metals
dc.treeJournal of Pressure Vessel Technology:;1987:;volume( 109 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record