Show simple item record

dc.contributor.authorT. R. Chari
dc.contributor.authorC. R. Dawe
dc.contributor.authorS. A. Barbour
dc.date.accessioned2017-05-08T23:25:28Z
dc.date.available2017-05-08T23:25:28Z
dc.date.copyrightFebruary, 1987
dc.date.issued1987
dc.identifier.issn0892-7219
dc.identifier.otherJMOEEX-28039#67_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102852
dc.description.abstractSeveral factors such as the wave characteristics, the seabed type, the sediment size, and the porosity characteristics influence the transient porewater pressure response below the mudline due to wave-seabed interaction. Experiments were conducted in a soil-wave tank in which the pressure variation profile inside a porous bed of sand was measured for different wave types. The measured pressures were correlated with simple theories based on wave energy dissipation in permeable seabed. Tests were conducted in which the combination of wave and soil conditions caused soil liquefaction and instability. These results were extrapolated to predict the potential conditions that may cause seabed instability in the Hibernia area of the Newfoundland Grand Banks. The experimental assembly, the results and correlations, and the limitations are discussed in this paper.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModel Studies of Wave-Seabed Interactions
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue1
dc.journal.titleJournal of Offshore Mechanics and Arctic Engineering
dc.identifier.doi10.1115/1.3256992
dc.journal.fristpage67
dc.journal.lastpage74
dc.identifier.eissn1528-896X
dc.keywordsWaves
dc.keywordsSeabed
dc.keywordsSoil
dc.keywordsPressure
dc.keywordsLiquefaction
dc.keywordsSands
dc.keywordsManufacturing
dc.keywordsEnergy dissipation
dc.keywordsPorosity
dc.keywordsSediments AND Wave energy
dc.treeJournal of Offshore Mechanics and Arctic Engineering:;1987:;volume( 109 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record