Show simple item record

dc.contributor.authorK. Tokaji
dc.contributor.authorZ. Ando
dc.contributor.authorK. Nagae
dc.date.accessioned2017-05-08T23:24:56Z
dc.date.available2017-05-08T23:24:56Z
dc.date.copyrightJanuary, 1987
dc.date.issued1987
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26913#86_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102554
dc.description.abstractCharacteristics of fatigue crack propagation have been investigated in a low carbon steel and a high tensile strength steel to evaluate the effect of sheet thickness. Crack propagation data are generated over a wide range of growth rates, from 10−8 to 10−3 mm/cycle, for load ratios of 0.05 and 0.70 at room temperature in laboratory air. Particular emphasis is placed on behavior at near-threshold growth rates. Near-threshold fatigue crack propagation behavior is found to show a marked sensitivity to sheet thickness, and near-threshold growth rates decrease and threshold values increase with increasing sheet thickness. Oxide and roughness-induced crack closure models are proposed as a mechanism for the effect of sheet thickness on near-threshold fatigue crack propagation. It is also shown that the requirement for specimen thickness recommended by ASTM, W/20≤B≤W/4, is not always valid for near-threshold fatigue crack propagation.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effect of Sheet Thickness on Near-Threshold Fatigue Crack Propagation and Oxide and Roughness-Induced Crack Closure
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225940
dc.journal.fristpage86
dc.journal.lastpage91
dc.identifier.eissn1528-8889
dc.keywordsSurface roughness
dc.keywordsFracture (Materials)
dc.keywordsFatigue cracks
dc.keywordsThickness
dc.keywordsASTM International
dc.keywordsMechanisms
dc.keywordsTensile strength
dc.keywordsCrack propagation
dc.keywordsCycles
dc.keywordsStress
dc.keywordsTemperature
dc.keywordsSteel AND Carbon steel
dc.treeJournal of Engineering Materials and Technology:;1987:;volume( 109 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record